you have to unbolt the pan on the bottom of the tranny ( very messy job ) and drain it and then change the tranny filter under the pan , put a new gasket on the pan and reinstall and fill the transmission.How do u change the transmission oil on a 97 4x4 chevy blazer?
Assuming it's an automatic, remove the bolts holding the oil pan to the transmission. When they get loose enough, the fluid will start running out around the sides. When the fluid stops running carefully remove the bolts and lower the pan. You will see the filter attached to the valvebody. Remove the filter and be sure the tube seal comes out of the bore with it. If not, remove it before installing new filter. Install new gasket on pan and install pan on tranny. Fill tranny with fliud to proper level and that's it.
rkbHow do u change the transmission oil on a 97 4x4 chevy blazer?
if the fluid on the stick looks good and no burnt oder just leave it alone
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment